| ⇦ | 
| ⇨ |
The necessary condition in making of a junction transistor (E- emitter, B- base and C- collector)
Options
(a) E and B are lightly doped and C is heavily doped
(b) E is heavily doped, B is thin and lightly doped and C is moderately doped
(c) E and C are lightly doped and B is thick and heavily doped
(d) E and B are heavily doped and C is lightly doped
Correct Answer:
E is heavily doped, B is thin and lightly doped and C is moderately doped
Explanation:
No explanation available. Be the first to write the explanation for this question by commenting below.
Related Questions: - An open pipe resonates with a tuning fork of frequency 500 Hz. It is observed
- Application of Bernoulli’s theorem can be seen in
- If longitudinal strain for a wire is 0.03 and its poisson’s ratio is 0.5
- The diameter of the eye ball of a normal eye is about 2.5 cm. The power of the eye
- The upper half of an inclined plane of inclination θ is perfectly smooth while lower
Topics: Electronic Devices
(124)
Subject: Physics
(2479)
Important MCQs Based on Medical Entrance Examinations To Improve Your NEET Score
- An open pipe resonates with a tuning fork of frequency 500 Hz. It is observed
- Application of Bernoulli’s theorem can be seen in
- If longitudinal strain for a wire is 0.03 and its poisson’s ratio is 0.5
- The diameter of the eye ball of a normal eye is about 2.5 cm. The power of the eye
- The upper half of an inclined plane of inclination θ is perfectly smooth while lower
Topics: Electronic Devices (124)
Subject: Physics (2479)
Important MCQs Based on Medical Entrance Examinations To Improve Your NEET Score
18000+ students are using NEETLab to improve their score. What about you?
Solve Previous Year MCQs, Mock Tests, Topicwise Practice Tests, Identify Weak Topics, Formula Flash cards and much more is available in NEETLab Android App to improve your NEET score.
Share this page with your friends
Leave a Reply